A concise introduction to Aluminum flame detector housing
Release time:
2022-03-28
In the control system of the burner, the aluminum flame detector housing is an important component, which is responsible for the calibration of the gas flame, the yellow or blue fuel flame and the ignition spark.
In the control system of the burner, the aluminum flame detector housing is an important component, which is responsible for the calibration of the gas flame, the yellow or blue fuel flame and the ignition spark.
Due to the different detection bands, it can be divided into ultraviolet, visible light, infrared and full radiation flame detection. The flame detection signal comes from the Aluminum flame detector housing, UV detector and smoke detector. Among the above-mentioned burner flame detectors, the Aluminum flame detector housing utilizing the principle of radiant light energy is the most widely used and the most effective burner flame detector method. The principle of radiation light intensity detection is to use the probe to receive the radiation emitted by the flame, and to judge the existence of the flame according to its intensity.
The radiation of flame is gas radiation with discrete spectrum and solid radiation with continuous spectrum, and its wavelength is in the range of 0.1-10 μm or wider. Ultraviolet flame detection technology successfully makes the system avoid the complex background caused by the most powerful natural light source, the sun, which greatly reduces the burden of information processing in the system. In addition, it is a photon detection method, so the signal-to-noise ratio is high, and it has the ability to detect extremely weak signals. In addition, it also has the characteristics of extremely fast response time. Compared with the infrared detector, the aluminum flame detector is more reliable, and has the characteristics of high sensitivity, high output, high response speed, the composition of the aluminum flame detector housing, and the simple application circuit. Therefore, the aluminum flame detector is increasingly widely used in combustion monitoring, fire self-alarm, discharge detection and other fields.
Through the above introduction and analysis of the Aluminum flame detector housing, hope it helps you.
Related News
MESSAGE
Hans Wang
Jacinda Lee
Sharon Zhao
David Yang
Binzhou Zeli Precision Metal Technology
Address: Wudi County Industrial Park, Xinghu 3rd Road, South Development 5th Road East
Tel：+86-543-6360571
Fax：+86-543-6360496
E-Mail：sales@zeliprecisionmetal.com
Copyright©Binzhou Zeli Precision Metal Technology
