Application and maintenance of Camlock coupling
Release time:
2021-05-26
Camlock coupling uses high-strength bolts and lock nuts to connect the flanges on both sides to the prefabricated components of other mechanical equipment. The transmission torque is transmitted according to the friction between the flange inner hole key and the flange.
Camlock coupling uses high-strength bolts and lock nuts to connect the flanges on both sides to the prefabricated components of other mechanical equipment. The transmission torque is transmitted according to the friction between the flange inner hole key and the flange.
Application and maintenance of Camlock coupling:
1. Before installing the Camlock coupling, clean up both sides, check the fit of the inner hole and the notch, and then tighten the screws so that they are not allowed to loosen;
2. After the Camlock coupling is installed, everything runs normally for one shift. Check that all the screws are tightened. If you find that it is loose, tighten it again with the required tightening torque, so as to keep multiple shifts to ensure that it is not easy to loosen;
3. Camlock coupling drag surface, crosshead, rolling bearing, etc. to ensure lubrication, generally use 2# industrial production lithium-based vegetable grease or 2# molybdenum disulfide calcium-based grease, and continue to run for 500 hours under general standards. Give oil once every 2 months of operation. If the oil is supplied once a week when working under high temperature standards, unscrew the oil inlet screw of the inner hole of the rolling bearing when oil is supplied, and use a high-pressure oil gun to introduce it until it overflows;
4. Camlock coupling is generally used for maintenance once every 3 months. If all normal damages such as embossing are found, they should be replaced immediately;
5. In order to increase the service life of Camlock coupling, adjust the cross shaft by 180° during maintenance and disassembly, so as to achieve the application of motor bearing force replacement;
6. Long-term overweight applications and actual operation safety accidents should be prevented;
7. During operation, you should always observe whether the Camlock coupling has abnormal axial shaking and rolling bearing hotness. If it is found, check and repair immediately;
8. Appropriate protective measures should be selected at each site where personal safety and machine equipment safety accidents are likely to be caused by the running of Camlock coupling.
Related News
MESSAGE
Hans Wang
Jacinda Lee
Sharon Zhao
David Yang
Binzhou Zeli Precision Metal Technology
Address: Wudi County Industrial Park, Xinghu 3rd Road, South Development 5th Road East
Tel：+86-543-6360571
Fax：+86-543-6360496
E-Mail：sales@zeliprecisionmetal.com
Copyright©Binzhou Zeli Precision Metal Technology
