How to avoid scrapping of aluminum Detector Housing

Release time:

2021-12-02

Aluminum Detector Housing is a variety of housings made of aluminum alloy. It is also a commonly used electronic packaging material on the market. The aluminum Detector Housing can be cut and die-cast at will. Usually there is a circuit board card slot inside. Just insert the circuit board directly without fixing it.

The processing speed of the aluminum Detector Housing is unmatched by other materials. The aluminum profile housing adopts one-time die-casting molding technology, which has waterproof and explosion-proof characteristics, so that there will be no water seepage phenomenon when used as an electrical component housing, which can be very good The protection of internal components.

Aluminum Detector Housing has good electrical and thermal conductivity, and its electrical and thermal conductivity is second only to silver, copper and gold. Take the aluminum alloy charging pile shell as an example, it will generate a lot of heat during work, the aluminum alloy can conduct internal heat well, will not damage the circuit, and the shell will not be deformed due to high temperature. Compared with plastic shells, aluminum alloy shells are easier to process and have good hardness, which exceeds the strength of many plastics and metals. How to avoid and prevent this from happening?

1. Extrusion and straightening. Straightening is a very important link in the production process of aluminum Detector Housing. The straightener must pay attention to the strength used for straightening. Excessive strength may cause deformation, closing, and orange peeling of the aluminum profile. Wait for the problem; if the force is too small, it may not be straightened and cause bending. So we must grasp the strength.

2. Extrusion and framing. This link is also very important. After the cut length is sawed, the aluminum Detector Housing will be framed. This fashion framer needs to pay attention: whether the material is large or small, is it with a tube or a material drawn from a flat die, generally speaking, it is not easy to bend the two ends of the large material and the material with the tube. , But the small material and the material drawn from the plane die will easily cause bending when lifting the two ends. At this time, the material should be lifted and framed by moving closer to the middle from the two ends. However, some aluminum profiles do not work even this way, such as shutters, windows, glands, etc., which must be placed on the aged aluminum profile and then lifted into the frame.

3. The surface treatment is put on the shelf, the billet has been aged and the hardness has reached the standard, so the aluminum profile is not so easy to bend, but you should still pay attention to it when lifting the material at both ends. The aluminum Detector Housing caused some bending.

Aluminum Detector Housing is a shell processed from aluminum profiles obtained by aluminum stretching. It has high flexibility and can be cut at any depth. Generally, there is a circuit board slot inside. You only need to insert the circuit board directly. It can be fixed again, and the convenience is unmatched by other kinds of shells, and this kind of shells has a wide range of application prospects.

Search historyClear all records

Display a maximum of 8 historical search records~

全部

全部
产品管理
新闻资讯
介绍内容
企业网点
常见问题
企业视频
企业图册