How to prevent the scrapping of aluminum flame detector housing products
Release time:
2022-01-27
Nowadays, the electronics industry is developing rapidly. Many electronic product housings are made of Aluminum flame detector housing products. Of course, the housing quality of different products is different.
Nowadays, the electronics industry is developing rapidly. Many electronic product housings are made of Aluminum flame detector housing products. Of course, the housing quality of different products is different. Enterprises should attach great importance to quality and production efficiency when processing Aluminium flame detector housing products. Many manufacturers are scrapping Aluminium flame detector housing products during processing. How to avoid this phenomenon?
1. Squeeze and straighten
Straightening is a very important part in the production process of aluminum flame detector housing products. The straightening worker must pay attention to the force used for straightening. If the force is too large, it may cause problems such as deformation, closing and orange peel of the aluminum profile; if the force is too small It may not be straightened again, resulting in bending. So be sure to grasp the strength.
2. Squeeze the frame
This link is also very important. After sawing the length, the aluminum flame detector housing products will be framed. At this time, the framer should pay attention to: whether the material is large or small, whether it is a material with a tube or a material drawn from a flat die, generally speaking, it is not easy to cause bending when the large material and the material with a tube are lifted and framed at both ends. , but the small material and the material drawn from the flat die are easily bent when the two ends are lifted. At this time, the material should be lifted and framed from the two ends to the middle. However, some aluminum flame detector housing products are still not enough, such as: shutters, windows, glands, etc., such materials must be placed on the aged aluminum profiles and then lifted into the frame.
3. Surface treatment on the shelf
The billet has been aged and the hardness has reached the standard, so the aluminum flame detector housing products are not so easy to bend, but it is still necessary to pay attention when putting on the shelf. When lifting the material at both ends, try to avoid strong fluctuations up and down, which will also affect the aged aluminum profiles. The shell causes some bending.
Manufacturers of aluminum flame detector housing products should pay more attention to the above three points in processing. Compared with plastic housings, aluminum flame detector housing products are simpler to process and have good hardness, which exceeds the strength of many plastics and metals. The future development prospects Very impressive, pay attention to relevant details during processing, improve product quality, and prevent the occurrence of scrapping.
Related News
MESSAGE
Hans Wang
Jacinda Lee
Sharon Zhao
David Yang
Binzhou Zeli Precision Metal Technology
Address: Wudi County Industrial Park, Xinghu 3rd Road, South Development 5th Road East
Tel：+86-543-6360571
Fax：+86-543-6360496
E-Mail：sales@zeliprecisionmetal.com
Copyright©Binzhou Zeli Precision Metal Technology
