Introduction to the investment casting process used by the Investment Casting part

Release time:

2022-06-14

The investment casting process used by Investment Casting part is also known as a lost wax casting, including wax pressing, wax trimming, tree forming, dipping, wax melting, molten metal casting, and post-processing.

Introduction to the investment casting process used by the Investment Casting part

Investment Casting part from China The lost wax casting used by Investment Casting part is to use wax to make a wax mold of the part to be cast, and then coat the wax mold with mud, which is a mud mold. After the clay mold is dry, put it in hot water to melt the inner wax mold. The clay mold that has melted the wax mold is taken out and fired into a pottery mold. Once roasted. Generally, the pouring port is left when the mud mold is made, and then the molten metal is poured from the pouring port. After cooling, the required parts are made.
Make castings
The Investment Casting part cast by investment casting has neither mold traces nor gasket traces, and it is better to use it to cast hollowed-out utensils. The traditional investment casting technology has a great influence on the metallurgical development of the world. Investment casting in modern industry is developed from the traditional lost wax method. Although they are very different in terms of wax materials, molding, modeling materials, and process methods used, their process principles are the same.
Through the above introduction and analysis of the investment casting process used by the Investment Casting part, hope it helps you.