Oil Pipe fitting manufacturer takes you to understand the precautions for installation of oil pipe joints
Release time:
2022-08-01
1. Oil Pipe fitting manufacturers tell you that oil pipe fittings should avoid bumping and falling during handling and storage, so as not to damage the interface and internal parts. Install the machine as concentric as possible to ensure the good operation of the rotary joint.
1. Oil Pipe fitting manufacturers tell you that oil pipe joints should avoid bumping and falling during handling and storage, so as not to damage the interface and internal parts. Install the machine as concentric as possible to ensure the good operation of the rotary joint.

2. Oil Pipe fitting manufacturers tell you that when installing a threaded rotary joint, you should pay attention to whether the thread direction of the inner and outer pipes corresponds to the rotation direction of the drum, and the thread rotation direction of the inner and outer pipes should also be the same.
3. Oil Pipe fitting manufacturers tell you that the connection between the oil pipe joint and the pipeline must be connected by a hose. It is recommended to use a metal hose with good disturbance, and the rigid connection is absolutely prohibited. The inlet and outlet of the oil pipe joint should be connected directly to the hose as far as possible. In order to reduce the auxiliary weight of the joint and prolong the service life.
4. Oil Pipe fitting manufacturers tell you that in the assembly of the inner pipe, pay attention to the matching of the size and the auxiliary support of the weight. The support and anti-rotation of the oil pipe joint should be appropriate. Generally, the diameter of the rod should be 2mm smaller than the anti-rotation hole, so as not to affect the free adjustment and compensation of the rotary joint.
The above information is the Oil Pipe fitting manufacturer's introduction and analysis of the precautions for installation of oil pipe fittings, hope it helps you.
Related News
