Types introduction of the Oil Pipe fittings

Release time:

2022-12-28

There are many types of oil pipe fittings for automobiles. Commonly used pipe joints can generally be divided into two types: hard pipe joints and hose joints. According to the connection method of pipe joints and pipes, there are three types of hard pipe joints: flared type, ferrule type, and welded type, and hose joints are mainly crimped hose joints.

Types introduction of the Oil Pipe fittings

The connection method between the pipeline and the Oil Pipe fitting in the hydraulic system is also different, and the screw-in end of the pipeline adopts the connecting thread. Tapered threads rely on their own cones to tighten and use PTFE and other substances for sealing operations, and are mainly used in medium and low-pressure hydraulic systems.
The oil pipe fitting with fine thread has a very good sealing effect and is often used in high-pressure systems, but it needs to use a combination washer or O-ring to seal the end face, and sometimes a copper washer is also used, which is more suitable for In the pipeline with thicker connecting pipe wall, the main components are the joint body, the connecting pipe, and the nut.
When in use, insert the Oil Pipe fitting into the target, use the gasket mentioned above to seal the end face, use a rubber seal between the joint body and the nozzle, and sometimes use the spherical sealing method.
Through the above introduction and analysis of the types introduction of the Oil Pipe fittings, hope it helps you.