What are the Pump Part
Release time:
2021-05-08
Pumps are divided into piston pumps, centrifugal pumps, diaphragm pumps, gear pumps, screw pumps, vane pumps, etc. from the structure. Pump parts are different in different structures. For example, piston pumps are mainly composed of pistons, cylinders, check valves, etc. composition.
Pumps are divided into piston pumps, centrifugal pumps, diaphragm pumps, gear pumps, screw pumps, vane pumps, etc. from the structure. Pump parts are different in different structures. For example, piston pumps are mainly composed of pistons, cylinders, check valves, etc. composition.
Water Pump Part mainly includes water pump impeller, water pump mechanical seal, shaft sleeve, pump shaft, pump bearing body, shaft coupling, bearing, bearing gland, flat cross ring, rotor, shaft coupling, pump body, oil chamber, seal, etc. .
Electric pumps are pumps driven by electricity. The electric Pump Part consists of a pump body, a water lift pipe, a pump seat, a submersible motor (including cables) and a starting protection device. The pump body is the working part of the submersible pump, which is composed of pump parts such as the water inlet pipe, the diversion shell, the check valve, the pump shaft and the impeller. There are two ways to fix the impeller on the shaft.
Positive displacement pump: The working volume is periodically increased and contracted by the movement of the working parts to suck and discharge the liquid, and the pressure of the liquid is directly increased by the squeezing of the working parts. According to the different movement modes of the moving parts, it is divided into two categories: reciprocating pump and rotary pump. According to the structure of the moving parts, there are piston pumps and plunger pumps, gear pumps, screw pumps, vane pumps and water ring pumps.
Impeller pump: It is composed of zero pump parts such as water inlet pipe, diversion shell, check valve, pump shaft and impeller. The impeller pump relies on the impeller to drive the liquid to rotate at high speed and transfer the mechanical energy to the conveyed liquid.
Diaphragm pump: Diaphragm pump, also known as control pump, is the main type of actuator. By receiving the control signal output by the modulation unit, it uses power operation to change the fluid flow. Diaphragm pumps are generally composed of pump parts such as actuators and valves. Using compressed air as the power source, all kinds of corrosive liquids, liquids with particles, high-viscosity, volatile, flammable, and highly toxic liquids can be exhausted.
Related News

